A broker sends you an $11 million offering with $820,000 of NOI. Your lender rebuilds the numbers, lands at $750,000, and the loan you planned on shrinks by more than $400,000 the week before your deposit goes hard. That gap is what underwriting exists to catch, and it’s cheaper to find it yourself first.
Underwriting in real estate is the process of verifying a property’s income, expenses, value and risk to decide whether a loan or an investment makes sense, and on what terms. Lenders underwrite to size a loan they’ll get repaid on. Investors underwrite to decide what price still earns their target return. The math is shared. The goal isn’t.
Below is the full commercial real estate underwriting process: documents, steps, formulas, published lender limits, and the stress tests that separate a deal that works from one that only works on paper.
What is underwriting in real estate?
Underwriting in real estate is the analysis a lender or investor performs to confirm what a property actually earns, what it’s worth, and how much risk sits between those numbers and the plan. The output is a decision: approve, reprice, restructure or walk. In commercial deals, the property’s cash flow carries most of the weight.
Residential underwriting leans on the borrower’s personal income and credit. Commercial underwriting flips that. Who pays the debt? The building, from its own net operating income. So the analysis starts with the rent roll and the operating statement, then works outward to the market, the sponsor and the loan structure.
Underwriters often summarize the review as the “three Cs”: credit (the sponsor’s track record and finances), capacity (the property’s ability to cover debt service), and collateral (what the asset is worth if things go wrong).

Lender underwriting vs. investor underwriting
Lender underwriting asks whether the loan will be repaid and what the lender recovers if it isn’t. Investor underwriting asks whether the price earns the required return after debt. Both start from the same rent roll and T-12, but the lender’s version is built to protect principal, so its NOI is almost always lower than the seller’s.
The Interagency Guidelines for Real Estate Lending Policies, published by the Federal Reserve, tell banks to weigh the borrower’s capacity to service the debt, the value of the property, the borrower’s creditworthiness, the equity invested, secondary sources of repayment and any additional collateral when underwriting a real estate loan.
Lenders take in-place rent, apply market vacancy even to a full building, add a management fee for self-managed assets, and deduct reserves. A disciplined investor builds that lender version first. If you can’t finance it, does the upside matter?
What documents do underwriters review?
Underwriters review the rent roll, the trailing 12-month operating statement (T-12), every lease and amendment, tenant estoppel certificates, tax and insurance bills, and third-party reports: the appraisal, the property condition assessment and the Phase I environmental site assessment. The goal is to prove each income and expense line with a second, independent document.
- Rent roll: who pays what, when leases expire, and which tenants carry the most income. Check tenant quality, concentration and rollover by year. If the seller exports abstracts from a lease administration system, this check takes hours rather than days.
- T-12: what the property actually collected and spent over the last 12 months.
- Leases and amendments: renewal options, free rent, tenant improvement obligations, expense reimbursements and co-tenancy or termination rights.
- Estoppel certificates: each tenant’s own confirmation of rent, term, deposits and any claimed landlord defaults.
- Appraisal: an independent value, usually from the income, sales comparison and cost approaches.
- Property condition assessment: deferred maintenance and the capital plan for roofs, HVAC, parking and structure.
- Phase I environmental site assessment: recognized environmental conditions that could affect value or financing.
The step most guides skip is reconciliation. Tie the rent roll to the T-12, then tie the T-12 to bank deposit statements. If the rent roll shows $104,000 of monthly rent and deposits average $96,000, you’ve found concessions, delinquency or a rent roll nobody is collecting on. Which one is it? Find out before you price the deal.

The commercial real estate underwriting process, step by step
The commercial real estate underwriting process moves from screening to verification to decision. You screen the deal on headline numbers, rebuild income and expenses from source documents, size the debt, test the downside, review the sponsor and market, then structure terms. Each step can kill the deal, and wouldn’t you rather it die early, when it costs least?
- Screen the deal. Test the broker’s NOI against the asking price. If it fails on the seller’s numbers, stop.
- Collect the file. Request every document listed above, plus two prior years of operating statements.
- Normalize income. Start from in-place rent. Remove expired leases, mark below-market and above-market leases, and apply a vacancy and credit loss factor that reflects the market, not the current occupancy.
- Normalize expenses. Reset taxes to the post-sale assessment where transfers trigger reassessment, quote insurance at today’s premium, and add a market management fee and reserves.
- Calculate underwritten NOI and value. Apply a market cap rate to your NOI, not the seller’s.
- Size the debt. Calculate the maximum loan under each lender test (LTV, DSCR, debt yield) and take the lowest.
- Model returns. Project cash flow over the hold period, add a sale at a conservative exit cap rate, and calculate IRR and equity multiple.
- Stress test. Shock rates, NOI and exit cap rate, alone and together.
- Review the sponsor and market. Check the sponsor’s experience, liquidity and net worth, then run a market analysis of supply, demand and comparable rents.
- Structure and decide. Set price, loan amount, reserves and covenants, or pass.
How do you calculate the key underwriting metrics?
You calculate underwriting metrics from one number first: net operating income, which is effective gross income minus operating expenses, before debt service and capital costs. Cap rate, DSCR, debt yield and LTV all build on NOI. IRR and equity multiple then measure what the equity earns over the full hold.
NOI = Effective Gross Income – Operating Expenses
Effective gross income is potential rent minus vacancy and credit loss, plus other income. Operating expenses exclude debt service, depreciation and capital improvements.
Cap Rate = NOI / Property Value
Cap rate is the property’s yield before debt at a given price. Use it in reverse to value a property: Value = NOI / Cap Rate.
DSCR = Net Cash Flow / Annual Debt Service
Debt service coverage ratio measures how many times a property’s net cash flow covers its annual principal and interest. Fannie Mae’s 2026 Multifamily Term Sheet sets a 1.25x minimum DSCR for conventional multifamily loans, which means at least $1.25 of cash flow for every $1.00 of debt service. Ask whether your lender measures it before or after reserves.
Debt Yield = NOI / Loan Amount
Debt yield is the lender’s cash return if it took the property back on day one. It ignores interest rate and amortization, which is why lenders use it as a check on loans that look fine on DSCR only because of a low rate or a long amortization schedule.
LTV = Loan Amount / Appraised Value
Loan-to-value measures the equity cushion between the loan and the collateral.
IRR = the discount rate at which the net present value of all equity cash flows equals zero
Internal rate of return accounts for timing: $1 back in year two counts for more than $1 back in year five.
Equity Multiple = Total Cash Distributions / Total Equity Invested
Equity multiple ignores timing and shows dollars returned per dollar invested. Which one matters more? Read the two together: a high IRR on a short hold can still return few total dollars.

What DSCR, LTV and debt yield do lenders require?
Lender thresholds depend on lender type, property type and loan program, but published limits exist. For banks, federal interagency guidelines set supervisory LTV ceilings by collateral type. Agency, life company and debt fund lenders set their own DSCR minimums and LTV maximums in each loan program’s term sheet or credit policy.
Under the Federal Reserve’s published Interagency Guidelines for Real Estate Lending Policies, the supervisory loan-to-value limits are 65% for raw land, 75% for land development, 80% for construction of commercial, multifamily and other nonresidential property, 85% for construction of one- to four-family residential property, and 85% for improved property.
Those are supervisory ceilings for banks, not loan offers. Banks set their internal policy limits at or below them, and on income property the DSCR and debt yield tests often bind before the LTV ceiling does. The same guidelines direct lenders to set “minimum standards for net worth, cash flow, and debt-service coverage of the borrower or underlying property,” without fixing a single DSCR number.
For agency multifamily debt, Fannie Mae’s fixed-rate multifamily term sheet pairs that 1.25x DSCR with an 80% maximum LTV for conventional properties. Seniors, student, manufactured and affordable housing follow separate term sheets.
Debt yield minimums come from each lender’s credit policy. Get it in writing before you model a loan.
Worked example: sizing the loan
In this illustrative example, a 40,000 square foot multi-tenant industrial building is under contract at $11,000,000. The lender’s policy (illustrative) allows a 75% LTV, requires a 1.25x DSCR on net cash flow, and requires a 9.5% debt yield. The loan carries a 6.5% fixed rate with 30-year amortization.
| Line item | Amount |
| Potential rent | $1,250,000 |
| Vacancy and credit loss (6%) | -$75,000 |
| Other income | $30,000 |
| Effective gross income | $1,205,000 |
| Operating expenses | -$455,000 |
| Underwritten NOI | $750,000 |
| Replacement reserves ($0.20/sf) | -$8,000 |
| Net cash flow | $742,000 |
| Max loan at 75% LTV | $8,250,000 |
| Max loan at 1.25x DSCR | $7,826,162 |
| Max loan at 9.5% debt yield | $7,894,737 |
| Loan offered (lowest test, rounded) | $7,825,000 |
The going-in cap rate is 6.82% ($750,000 / $11,000,000). DSCR binds, so the loan lands at 71.1% LTV, not the 75% the sponsor expected. Does a lower rate fix that? Drop the rate to 5.75% and the DSCR test rises to about $8.48 million, but debt yield caps the loan at $7.89 million. Debt yield doesn’t care what you pay in interest.
How do you stress test an underwriting model?
You stress test an underwriting model by changing one assumption at a time, then several together, and watching DSCR, debt yield, IRR and equity multiple. Standard shocks are higher interest rates, lower NOI and a wider exit cap rate. The question isn’t whether the base case works. It’s how much has to go wrong before it breaks.
The Interagency Guidelines for Real Estate Lending Policies direct banks to set requirements for feasibility studies and sensitivity and risk analyses on development, construction and completed commercial property loans. A borrower who runs those sensitivity cases before submitting a loan request answers the lender’s first questions in advance.
Using the example above, with a five-year hold, 2.5% annual NOI growth, a 7.25% base exit cap rate, 2% selling costs, and $3,418,250 of total equity (down payment, 1.5% closing costs and a 1% loan fee):
| Scenario | DSCR | Debt yield | IRR | Equity multiple |
| Base case | 1.25x | 9.58% | 8.9% | 1.49x |
| Rate locks 100 bps higher (7.5%) | 1.13x | 9.58% | 6.8% | 1.37x |
| NOI 10% lower | 1.12x | 8.63% | 0.7% | 1.03x |
| Exit cap 50 bps wider (7.75%) | 1.25x | 9.58% | 5.3% | 1.27x |
| All three together | 1.02x | 8.63% | -6.4% | 0.72x |
Look at the NOI line. A 10% miss on income, which is one large tenant leaving, cuts the IRR to almost nothing. Would you have caught that from the base case alone? Break-even occupancy tells the same story from another angle:
Break-even Occupancy = (Operating Expenses + Reserves + Debt Service) / Potential Gross Income
Here that’s ($455,000 + $8,000 + $593,512) / $1,280,000, or 82.5%. The building can lose about 11 points of occupancy from the underwritten level before cash flow turns negative.

Red flags that should stop the deal
Some findings don’t call for a sharper pencil. They call for a renegotiation or a pass:
- Rent roll income that doesn’t reconcile to the T-12 or to bank deposits.
- Heavy lease rollover: one tenant producing a large share of income with a lease expiring inside your loan term.
- Estoppels that contradict the leases on rent, term or landlord defaults.
- Expenses well below comparable properties, especially taxes that will reset on sale.
- A DSCR that passes only with interest-only payments or an unusually long amortization.
- Any recognized environmental condition in the Phase I report.
- A return that depends on an exit cap rate lower than the going-in cap rate.
After closing, track actual NOI against underwritten NOI every month. When your asset management platform ties the original model to the general ledger, a variance shows up in the first quarter instead of at the refinance.
Keep your underwriting tied to actual results
Most underwriting lives in a spreadsheet that stops matching reality the day you close. Elevate Solutions builds real estate investment management on Acumatica cloud ERP, so your property financials, rent roll, debt schedules and investor reporting sit on one set of books. You can compare underwritten NOI to actual NOI by property, see covenant tests like DSCR before your lender does, and give asset managers numbers they don’t have to rebuild. Elevate Solutions was founded by a CPA and has served more than 1,000 real estate firms. Book a demo to see it with your own portfolio data.





